View TM043NVHG01-00_7854896.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 1 of 26 coversheet model no. : TM043NVHG01-00 issued date: 201 3 - 07 - 30 version : ver 1 . 0 preliminary specification final product specification customer : approved by notes shanghai tianma confirmed : prepar ed by checked by approved by 2013/07/30 2013/07/30 ? 2013/07/30 this technical specification is subjected to change without notice
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 2 of 26 table of contents coversheet .................................................................................................... ............................................. 1 record of revision .................................................................................................... ................................ 3 1. general specifications .................................................................................................... ................... 4 2. input/output terminals .................................................................................................... ................... 5 3 absolute maximum ratings .................................................................................................... ........... 6 4 electrical c haracteristics .................................................................................................... ............... 6 4.1 driving tft lcd panel .................................................................................................... ........... 6 4.2 driving ctp .................................................................................................... .............................. 7 4.3 driving backlight .................................................................................................... ...................... 7 4. 4 block diagram .................................................................................................... .......................... 8 5. interface timing .................................................................................................... .................................. 9 5.1 input setup timing setting .................................................................................................... ...... 9 5.2 data i nput f ormat .................................................................................................... .................. 1 1 5. 3 power on/off sequence .................................................................................................... .... 1 4 5.4 ctp timing.............................................................................................. ...........................15 6. optical c haracteristics .................................................................................................... ................. 1 9 7. environmental / reliability t est .................................................................................................... ... 22 8. mechanical d rawing .................................................................................................... ..................... 23 9. packing drawing .................................................................................................... .......................... 24 10. precaution for use of lcd modules ............................................................................................... 2 5
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 3 of 26 record of r ev i sion rev issued date description editor 1 . 0 201 3 -07- 30 preliminary release . wallace.jiang
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 4 of 26 1. general s pecifications feature spec display spec. size 4.3 inch resolution 480 (rgb) x 272 interface rgb 24 bits ctp:i2c color depth 16m technology typ e a- si pixel p itch (mm) 0.198x0.198 pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment ctp:6h u p polarizer : anti-glare(3h) viewing direction 6 o clock gray scale inversion direction 12 o clock active area(mm) lcd: 95 . 04 x 53 . 86 ctp:97.44(w) x 56.26(h) lcm (w x h x d) (mm) 113.44x71.46x4.55 ctp structure glass lens glass sensor ctp touch method bare finger number of simultaneous touches 5 points minimum touch area (mm) 6 finger touch pitch (mm) 13 control ic ctp: ft5306 tft lcd:hx8257a led numbers 1 0 leds note 1 : viewing direction for best image quality is different from tft definition, there is a 180 degree shift. note 2 : requirements on environmental protection: q/s0002 note 3: lcm weight tolerance : 5%
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 5 of 26 2. input/output terminals 2.1 tft lcd pin assignment no symbol i/o description remark 1 vled- p back light cathode 2 vled+ p back light anode 3 gnd p ground 4 vdd p power supply 5 r0 i data input 6 r1 i data input 7 r2 i data input 8 r3 i data input 9 r4 i data input 10 r5 i data input 11 r6 i data input 12 r7 i data input 13 g0 i data input 14 g1 i data input 15 g2 i data input 16 g3 i data input 17 g4 i data input 18 g5 i data input 19 g6 i data input 20 g7 i data input 21 b0 i data input 22 b1 i data input 23 b2 i data input 24 b3 i data input 25 b4 i data input 26 b5 i data input 27 b6 i data input 28 b7 i data input 29 gnd p ground 30 dclk i clock for input data. data latched at ris ing edge of this signal. 31 disp i standby mode. disp = 1 : normally operation. disp = 0 : standby mode. 32 hsync i horizontal sync input with negative polarity. if unused, please pull high level. 33 vsync i vertical sync input with negative polarity. if unused, please pull high level. 34 de i data input enable. if unused, please pull low level. 35 nc -- no connection 36 gnd p ground. 37 x_r -- no connection 38 y_b -- no connection 39 x_l -- no connection 40 y_t -- no connection note i -- input o -- output p -- power/ground
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 6 of 26 table 2 .1 i nput t erminal p in a ssignment 2.2 ctp pin assignment pin no. symbol i/o description remark 1 ~ 5 gnd p groud 6 vcc i/o ctp power supply 7 int p external interrupt to the host 8 wakeup i/o external interrupt from the host 9 scl o i2c clock input 10 sda p i2c data input and output 3 absolute maximum ratings 3.1 driving tft lcd panel gnd=0v,ta=25 item symbol m in m ax unit remark supply voltage vdd -0.3 4.0 v back light forward current i led 25 ma for each led operating temperature t opr -20 70 storage temperature t stg -30 80 note1: the parameter is for driver ic (gate driver, source driver) only. note 2 : signals include r0~r5, g0~g5, b0~b5, dclk, disp, hsync, vsync, de table 3 .1 absolute maximum rating 4 electrical characteristics 4.1 driving tft lcd panel gnd=0v, ta=25 item symbol m in t yp m ax unit remark supply voltage vdd 3.0 3.3 3.6 v input signal voltage low level v il 0 -- 0.3 x vdd v r0~r5, g0~g5, b0~b5, dclk, disp, hsync, vsync, de high level v ih 0.7xvdd -- vdd v out put signal voltage low level v o l -- -- 0.2 x vdd v high level v o h 0.8 x vdd -- vdd v
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 7 of 26 (panel+lsi) power consumption black mode ( 60 h z ) 74.0 mw s tandby mode 50 u w note 1 note 1 : to test the current dissipation, us e all black pattern . t able 4.1 lcd module electrical characteristics 4.2 driving ctp (t a = 25 ,vdd=3.3v ) item min typ max unit note power supply voltage -- 3.3 -- v dc(noise should be under 100mv) power supply current -- 20 -- ma one finger on sensor sleep mode -- 2 -- ma respond time -- -- 200 ms note1: all current measurement is average current. 4. 3 driving backlight item symbol min typ max unit remark channel i channel - - 20.0 25.0 ma note 1 forward voltage v bl -- 16 -- v backlight power consumption w bl - - 640 - - mw life time -- 10,000 (20,000) -- hrs note 3 note 1: i f is defined for one channel led. there are total t wo led channels in back light unit note 2: optical performance should be evaluated at ta=25 only. note 3: if led is driven by high current, high ambient temperature & humidity condition. the life time of led will be reduced.operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data. t able 4.2 led backlight characteristics f igure 4.2 led connection of backlight
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 8 of 26 4.4 block diagram 4.3 inch 48 0(rgb)* 272 lcd panel blu source + gate driver grayscale manipulation voltage vcom & tcon dc/dc fpc data bus v dd ,gnd power blu v led+ v led- vs ync hsync de dclk disp r [7:0] g [7:0] b [7:0] control s ignal input figure 4 . 3 lcd m odule d iagram
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 9 of 26 5. interface timing 5.1 input setup timing setting 5.1.1 input setup timing parameter setting vdd=3.3v ta=25 normal write mode parameter symbol min typ max unit remark d clk cycle time t pw 66.7 - - ns d clk pulse high width t p w h 26.7 - - ns d clk pulse low width t p w l 26.7 - - ns de setup time t de s 10 - - ns de hold time t d eh 10 - - ns hs ync setup time t hs 10 - - ns hs ync hold time t hh 10 - - ns vs ync setup time t v h s 10 - - ns vs ync hold time t v h h 10 - - ns data setup time t ds 10 - - ns data hold time t dh 10 - - ns disp setup time t diss 10 - - us disp hold time t dish 10 - - ms note 1 t r =t f =2ns.t r , t f is defined 10% to 90% of signal amplitude. note 2 for parallel interface, maximum clock frequency is 15mhz. table 5.1 input setup timing parameters requirement
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 10 of 26 5.1 .2 input setup timing diagram figure 5.1 .2 input setup timing diagram
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 11 of 26 5. 2 data i nput f ormat 5. 2. 1 data input t iming parameter setting parameter symbol min typ max unit remark dclk frequency f clk -- 9 15 mhz hsync frequency 1/t h -- 17.14 -- khz v sync frequency 1/t v -- 59.94 -- hz horizontal cycle t h 525 525 605 dclk horizontal display period t hd 480 dclk horizontal pulse width t hp 2 41 41 dclk horizontal back porch t hb 2 2 41 dclk horizontal front porch t hf 2 2 82 dclk vertical cycle t v 285 286 399 hsync vertical display period t vd 272 hsync vertical pulse width t vp 1 10 11 hsync vertical back porch t vb 1 2 11 hsync vertical front porch t vf 1 2 227 hsync note 1 unit: clk=1/ f clk , h= t h , note 2 it is necessary to keep t vp +t vb =12 and t hp +t hb = 43 in sync mode. de mode is unnecessary to keep it. table 5. 2.2 data input t iming parameters requirement
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 12 of 26 5. 2.2 data input timing diagram 5. 2 . 2.1 data input timing diagram under sync mode figure 5. 2 . 1 data input timing diagram under sync mode(de= l )
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 13 of 26 5. 2 . 2.2 data input timing diagram under de mode figure 5. 2 . 2 data input timing diagram under de mode(vsync/hsync= h )
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 14 of 26 5.3 p ower on/off sequence 5.3.1 p ower on sequence f igure 5.3.1 p ower on sequence 5.3.2 p ower o ff sequence f igure 5.3.2 p ower off sequence
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 15 of 26 5.4 ctp timing 5.4.1 i2c interface ft 5 3 06 supports the i 2 c or spi interfaces , which can be used by a host processor or other devices . the i 2 c is always configured in the slave mode . the data transfer format is shown as below i2c serial data transfer format i2c master write, slave read i2c master read, slave write
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 16 of 26 5.4.2 power on/reset sequence power on time power on sequence reset sequence
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 17 of 26 5.4.3 ctp instruction description(more information refer to ft5306 datasheet)
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 18 of 26
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 19 of 26 6. optical c haracteristics item symbol condition min typ max unit remark view angles t cr R 10 60 70 - - degree note 2 b 40 50 - - l 60 70 - - r 60 70 - - contrast ratio cr =0 400 500 - - note 1 note3 response time t on 25 - - 20 30 ms note 1 note4 t off chromaticity white x b acklight is on 0.265 0.315 0.365 note5 note1 y 0.285 0.335 0.385 r ed x 0.531 0.581 0.631 y 0.295 0.345 0.395 g reen x 0.298 0.348 0.395 y 0.531 0.581 0.631 b lue x 0.103 0.153 0.203 y 0.045 0.095 0.145 uniformity u 75 80 - - % note 1 note6 ntsc - - 50 - - % note 5 luminance l 2 1 0 26 0 - - cd/m 2 note 1 note7
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 20 of 26 test conditions: 1. i f = 20ma(one channel),the ambient temperature is 25 . 2. the test systems refer to note 1 and note 2. note 1: definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. 500mm photo detector field lcd panel tft-lcd module the center of the screen note 2: definition of viewing angle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) note 3: definition of contrast ratio white state : the state is that the lcd should drive by vwhite. black state : the state is that the lcd should drive by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between white state and item photo detector field contrast ratio sr-3a 1 luminance chromaticity lum uniformity response time bm-7a 2
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 21 of 26 black state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity (u) = lmin/ lmax l-------active area length w----- active area width lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance: measure the luminance of white state at center point.
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 22 of 26 7. environmental / reliability t est no test item condition remarks 1 high temperature operation ts = + 70 , 240 hours note1 iec60068-2-1,gb2423.2 2 low temperature operation ta = - 2 0 , 240 hours iec60068-2-1 gb2423.1 3 high temperature storage ta = + 80 , 240 hours iec60068-2-1 gb2423.2 4 low temperature storage ta = -30 , 240 hours iec60068-2-1 gb2423.1 5 storage at high temperature and humidity ta = + 6 0 , 90% rh max,240hours note2 iec60068-2-78 gb/t2423.3 6 thermal shock (non-operation) - 2 0 30 min~+ 8 0 30 min, change time:5min, 100 cycle start with cold temperature, end with high temperature, iec60068-2-14,gb2423.22 7 esd c=150pf,r=330 ,5point/panel air: 8 kv, 5 times; contact: 4 kv, 5 times (environment:15 ~35 , 30%~60%.86kpa~106kpa) iec61000-4-2 gb/t17626.2 8 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z. (6 hours for total) iec60068-2-6 gb/t2423.10 9 mechanical shock (non op) half sine wave 60 g 6ms, x, y, z 3times for each direction iec60068-2-27 gb/t2423.5 10 package drop test height:60cm , 1corner , 3edges , 6surfaces iec60068-2-32 gb/t2423.8 1 1 package vibration test random vibration: 0.015g*g/hz for 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x,y,z (6 hours for total) iec60068-2-34 gb/t2423.11 note1: ts is the temperature of panel s surface. note2: ta is the ambient temperature of samples.
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 23 of 26 8. mechanical d rawing
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 24 of 26 9. packing drawing 9.1 packaging material no item model(material) dimensions (mm) unit weigt (kg) quantity remark 1 lcm module tm043ndh02 105.5 x 67.2 x 2.9 0.044 112 2 partition_1 c orrugated p aper 513 x 333 x 106 0.7 2 3. anti-static bag pe 1 75.8 x 125 x 0.05 0.0007 112 anti-static 4 d ust -p roof b ag pe 700 x 530 0.0600 1 5 partition _2 c orrugated p aper 505 x 332 x 4.00 0.09 3 6 c orrugated b ar c orrugated p aper 513 x 117 x 3 0.04 8 7 carton c orrugated p aper 530 x 35 0 x 25 0 1.1000 1 8 total weight tbd kg note: packaging specification and quantity module quantity in a carton 2 8 pcs (per row)x 2 (per column )x2 = 112 pcs 9.2 packing instruaction
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 25 of 26 20 12 01 20 12 01 20 12 01 20 12 01 20 12 01 20 12 01 20 12 01 20 12 01 10. precautions for use of lcd modules 10.1 handling precautions 10.1.1 t he display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol solvents other than those mentioned above may damage the polarizer. especially, do not use the following: water ketone aromatic solvents 10.1.6 do not attempt to disassemble the lcd module.
shanghai tianma micro-electronics TM043NVHG01-00 v 1.0 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 26 of 26 10.1.7 if the logic circuit power is off, do not apply the input signals. 10.1.8 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1 be sure to ground the body when handling the lcd modules. 10 .1.8.2 tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.2 storage precautions 10.2.1 when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humidity: 80% 10.2.3 the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.3 transportation precautions 10.3.1 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM043NVHG01-00

	To Download TM043NVHG01-00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .